Skip to main content
Jan Wittkamp
CEO @ Memida GmbH
View all authors

Memida - Software News

Dashboard persönlich anpassen

· 4 min read
Jan Wittkamp
CEO @ Memida GmbH

Welche Ausgabe steht an, welche Übergabe wartet auf Ihre Bestätigung und welche Rückgabe können Sie annehmen? Das Dashboard ergänzt die Prüfmittelübersicht jetzt um Kennzahlen und persönliche Aufgaben zu Ausleihen. Von dort öffnen Sie den passenden Vorgang für den nächsten Arbeitsschritt. Persönlich zugeordnete Vorgänge bleiben auch ohne Zugriff auf die allgemeine Ausleihverwaltung erreichbar.

Außerdem können Sie selbst auswählen, welche Kennzahlen und Diagramme Sie sehen möchten. Die bestehende Prüfplanung erhält eine kompaktere Darstellung mit zusätzlichen Hinweisen zur Verteilung der anstehenden Prüfungen.

Dokumente für Ausleihen

· 5 min read
Jan Wittkamp
CEO @ Memida GmbH

Wenn ein Messkoffer das Lager verlässt, sollen Inhalt, Einsatzort und Rückgabetermin auch auf den Begleitunterlagen zusammenpassen. Memida erstellt dafür jetzt eine Packliste und ein passendes Ausleihetikett direkt aus dem Vorgang. Der Aufkleber-Assistent erhält eine eigene Vorlagenart für Ausleihen mit Angaben wie Projekt, Empfänger und Rückgabe bis.

Benötigen externe Beteiligte einen Kalibrierschein, geben Sie die ausgewählten PDF-Dateien gezielt für ihren Gastzugang frei. Für PDF-Ausgaben können Sie außerdem Logo, Firmenname und Akzentfarbe hinterlegen. Diese Ergänzungen verbinden die digitale Ausleihe und Reservierung mit den Unterlagen für Verpackung, Versand und Empfang.

Ausleihen und reservieren

· 8 min read
Jan Wittkamp
CEO @ Memida GmbH

Wer hat den Messkoffer, wann kommt er zurück und ist er für den nächsten Einsatz frei? Unter Ausleihe führen Sie Reservierungen, Ausgaben und Rücknahmen jetzt in einem gemeinsamen Vorgang. Empfänger, Projekt, Einsatzort und Zeitraum bleiben zusammen mit den einzelnen Schritten nachvollziehbar. Weitere Personen können den Vorgang begleiten; externe Gäste nehmen über einen persönlichen E-Mail-Link teil.

Die Funktion ergänzt die Prüfmittelakte: Der Ausleihstatus beschreibt den Weg zum Einsatz und zurück. Prüfmittelstatus, Kalibrierpflicht und nächstes Prüfdatum bleiben eigenständige Angaben und werden bei der Ausgabe berücksichtigt.

Look up inspection equipment offline

· 3 min read
Jan Wittkamp
CEO @ Memida GmbH

The serial number matches, but when was the item last inspected? The Memida App can now answer questions like this even where mobile reception does not reach. The new offline feature brings inspection equipment records, report details, and selected files directly to the point of use, from the warehouse to the construction site.

Once enabled, the iOS and Android app handles regular updates automatically when connected. You no longer need to synchronize manually before every lookup.

Sign and verify locally

· 3 min read
Jan Wittkamp
CEO @ Memida GmbH

Whether a PDF or a digital calibration certificate in DCC format, Memida Signing applies a company seal to your files directly on your computer. The free desktop app also processes documents from other systems. It saves sealed copies and leaves the originals unchanged.

Local sealing requires a valid, supported company certificate, but no Memida account. The app also helps recipients: existing seals can be verified without a certificate of your own. The documents are not uploaded in the process.

From measured values to a calibration certificate

· 3 min read
Jan Wittkamp
CEO @ Memida GmbH

From a series of measurements to the finished document, many details need to come together: measurement requirements, reference devices, actual values, and their evaluation. Memida now combines them in a guided certificate creation workflow directly on the inspection equipment. The result is a digital calibration certificate (DCC) with machine-readable XML and a readable PDF representation.

The feature supports documenting a calibration that has actually been performed. Measurement and technical responsibility for the procedure and measurement uncertainty remain with the laboratory performing the calibration.

Import calibration certificates

· 4 min read
Jan Wittkamp
CEO @ Memida GmbH

When several calibration certificates arrive from the lab, the work often starts with transferring details and finding the corresponding inspection equipment. The new import under Inspection reports → Import brings these tasks together: Memida reads PDF and DCC files, suggests matches, and prepares the inspection reports for review.

This lets you process larger batches of documents together while retaining responsibility for the technical decision on each result.

Group Inspection Equipment

· 3 min read
Jan Wittkamp
CEO @ Memida GmbH

Inspection kits, measurement stations, and other related equipment can now be represented in Memida as a Group / set. This keeps it clear in the inspection equipment list which items are used together without merging their individual inspection equipment files.

A group is a structural container, not an additional physical piece of inspection equipment. Its members retain their own master data, inspection intervals, inspection reports, and inspection instructions. The group automatically inherits the most critical status from its active members.

Keep Notices and Changes in View

· 3 min read
Jan Wittkamp
CEO @ Memida GmbH

The dashboard now brings together open notices, required actions, and unread changes to inspection equipment in the shared Notices & activity card. This puts the most important next steps directly beside the charts, without requiring you to switch between individual notices and lists.

Company and cost center filters also apply to this work list. This ensures that metrics, charts, notices, and changes always refer to the same accessible data scope.

Edit Inspection Equipment Quickly

· 2 min read
Jan Wittkamp
CEO @ Memida GmbH

Many changes to inspection equipment are small but frequent in daily work: correcting a serial number, changing a cost center, adding a location, or maintaining an additional field. For these cases, the full inspection equipment file no longer has to be opened every time. The inspection equipment list can edit selected fields directly.

Double-clicking an editable cell opens the matching editor in place. The change is saved and the list stays in the working context.