Skip to main content

From measured values to a calibration certificate

· 3 min read
Jan Wittkamp
CEO @ Memida GmbH

From a series of measurements to the finished document, many details need to come together: measurement requirements, reference devices, actual values, and their evaluation. Memida now combines them in a guided certificate creation workflow directly on the inspection equipment. The result is a digital calibration certificate (DCC) with machine-readable XML and a readable PDF representation.

The feature supports documenting a calibration that has actually been performed. Measurement and technical responsibility for the procedure and measurement uncertainty remain with the laboratory performing the calibration.

Fig. 1: Recording measured values and the calibration certificate

Measurement series with a traceable basis​

Actual values (1) can be entered individually or pasted as a measurement series from a spreadsheet, with remarks added as needed. Memida evaluates measurement points against the limits and the interval actual value ± U. In the PDF (2), the results are presented as a table and a chart showing measurement deviations, uncertainties, and limits.

Active Measurement templates provide reusable nominal values, limits, and the expanded measurement uncertainty U (k = 2) for inspection equipment of the same device model. Calibration plans add the procedure, measurement conditions, and suggested reference devices. The reference devices actually used are documented in the workflow.

The revisions captured at the start remain assigned to the workflow. Later template changes do not overwrite its basis. Memida uses the stored measurement uncertainty; entering actual values does not calculate a new uncertainty budget.

One result, several ways to finalize it​

Fig. 2: Calibration certificate preview and finalization options

The preview (1) lets you review the result before finalizing it. Seal and complete (2) uses Memida Signing; Download XML and seal externally (3) allows an external sealing process. You can also finalize without an electronic seal. Sealing requires two-factor authentication and a certificate approved for the company.

Only finalization creates the inspection report and its files. The DCC XML is authoritative; the electronic seal also applies to this file. The PDF provides a readable representation.

Immutable after finalization

Finalized DCC inspection reports are immutable: the REST API also rejects subsequent changes. Connected applications must account for this restriction.

Grant access to specific tasks​

The new permissions View measurement templates, Edit measurement templates, and Seal DCC calibration certificates separate template maintenance from permission to seal. No default group receives them automatically. Edit measurement templates requires View measurement templates; sealing additionally requires View inspection equipment and Edit inspection reports, including View inspection reports.

View inspection requirements and Edit inspection requirements cover calibration plans, inspection instructions, and documents. User management explains how to assign these permissions individually.


The handbook explains setup, finalization, and the implications for integrations.